20BBL all in one electric brewing system Standard Configuration
- Two, three or four vessel systems are available
- The TRC is fitted to all piping, including elbows, tees, and curves in the system. This allows for a completely sanitary system.
- Constructed from 304 or stainless steel
- All pumps and motors in the Brewing System are made of 100% stainless steel
- Rake System has both hydraulic and non-lifting lifting options
- Available in floor, vessel and ceiling mounted versions
- Mash tun with flat bottom or conical bottom
20BBL brewing system Advantages
- The Mash Tank is equipped with an easy-to-read level gauge. The milled plates are used in all mash tanks, which provide a better filtration and accuracy.
- The grains outside the mash tun are equipped with a dustpan. This is convenient to clean and remove grains. Drain outlet and discharge outlet are separated, making it easy for customers to discharge their products directly.
- The mash system is able to meet both the feeding requirements in the boiling pot and the mash tin, depending on the brewing process of the customer.
- Our mash system is capable of both pumping and natural filtration. The mash-tun stirring motor has a frequency converter that allows for stepless speed regulation. The motor for the rake can be designed to move up and down in order to lift it.
- The kettle has an indoor or outdoor exhaust device depending on the customer’s needs to avoid excessive water vapor.
- Equipping the wort with an inline special hop filter will make it clearer prior to fermentation.
- Pump motors are made by JLEM or ABB, both American brands, with long-lasting service and low noise.
- The mash tun has a grist-hydra tor that ensures uniform malt moisture.
- The brewing system pipe design includes a thermometer and flow meter that can mix cold and warm water evenly before mashing.
- The bottom of the mash tun has a wort-collection loop and a device for flushing under it.
- Equipping a wort balance tank for checking the clarity of the wort, and protecting the sieve plate.
- Equipping the tank with a double CIP cleaning loop and a sparge arm.
- The bottom of the milling sieve plate is fixed and can be cleaned.
- The HLT is designed with a return, CIP, cleaning, and water inlet port that allows for the reuse and utilization of the hot water.
- Always use full-glass manways in brewing system.
20BBL brewing system Specification
- Effective volume: 20BBL
- Total volume: 25BBL
- Size: 2200*3400mm
- Material: SUS304/SUS316/red Copper
- Heating method: Electric/steam/direct fire heating
- Control system: PLC Simens or PID Schneider/ABB brand
- Heating area: 4㎡
- Power: 15-70 Kw, depends on the size
- Voltage: 3 phase/380 (220, 415,480…)v/50(60)Hz
Single Phase/220 (110, 240…)v/50(60)Hz - Brewing batch: 6-12 brew/week
- Work pressure: inner jacket 0.4MPa
cooling jacket 0.5Mpa - Design pressure: inner jacket 0.2MPa
cooling jacket 0.3Mpa - Brew master quantity: 1
20BBL brewing system Optional Configuration
- Automation systems
- Complete Grain Mill System
- Various Stainless Steel Finishes
- Fermentation tank
- Bright tank
- Our standard beer brewing system comes with a 2B mill finish; other finishes are available including:Polished/Brushed/Mirror finish/Pickling passivation Copper Clad and/Copper accented